ace 78lxxg 100ma positive voltage r egulator ver1. 5 1 d escription t he ace78lxx g series of positive regulators are available in the sot - 89 - 3 package and with 5v, 6v, 8v, 9v, 10v, 12v, 15v, 18v and 24v fixed output voltages, marking it useful in a wide range of applications. these regulators can provide local on - card regulation, eliminating the distribution problems associated with single point regulation. each type employs internal current limiting, thermal shut - down and safe operating area protection, making it essentially indestructible. if adequate heat si nking is provided, they can deliver over 100ma output current. although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. ace78lxx g is characterized for operation from 0 to +125 . features ? internal short - circuit current limiting ? internal thermal overload protection ? no external components required absolute maximum ratings parameter max unit input v oltage ace78l0 5 ~10 g 30 v ace78l12~18 g 35 ace78l24 g 40 output curr ent 100 ma operating junction temperature range 0 ~125 o c storage temperature range - 55 ~ 150 o c power dissipation 350* mw * when tested in free air condition, without heat sinking. packaging type s ot - 89 - 3 vout gnd vin
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 2 ordering information ace 78 l xx g xx + h typical applicat ion vin vout ace78lxxg gnd cin co ut 0.33uf 0.1uf electrical characteristics ace78l05 g (refer to the test circuits, t j =0~125 , i o =40ma, v in =10v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank ( 5%) v in =10v, i o =40ma, t j =25 7v Q v in Q 20v, 1ma Q i o Q 40ma 7v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 4.75 5.25 v vo (line regulation) 7v Q v in Q 20v, i o =40ma, t j =25 18 75 mv 8v Q v in Q 20v, i o =40ma, t j =25 10 5 4 vo (load regulation) v in =10v, 1ma Q i o Q 100ma, t j =25 20 6 0 mv v in =10v, 1ma Q i o Q 40ma, t j =25 5 30 iq v in =10v, i o =0ma,t j =25 3.0 5.0 ma iq v in =10v, 1ma Q i o Q 40ma 0.1 ma 8v Q v in Q 20v, i o =40ma 1.0 vn 10hz Q f Q 100khz 40 v rr 8v Q v in Q 20v, i o =40ma, f=120hz,t j =25 47 62 db vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 - 0.65 mv/ am : sot - 89 - 3 pb - free output voltage : 5v, 6v, 8v, 9v, 10v, 12v, 15v, 18v and 24v halogen - free
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 3 ace78l0 6 g (refer to the test circuits, t j =0~125 , i o =40ma, v in =1 2 v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank (5%) v in =1 2 v, i o =40ma, t j =25 8.5 v Q v in Q 20v, 1ma Q i o Q 40ma 8.5 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 5.70 6.30 v vo (line regulation) 8.5 v Q v in Q 20v, i o =40ma, t j =25 65 175 mv 9 v Q v in Q 20v, i o =40ma, t j =25 54 125 vo (load regulation) v in =1 2 v, 1ma Q i o Q 100ma, t j =25 12.8 80 mv v in =1 2 v, 1ma Q i o Q 7 0ma, t j = 25 5.8 4 0 iq v in =1 2 v, i o =0ma,t j =25 3. 9 6 .0 ma iq v in =1 2 v, 1ma Q i o Q 40ma 0.1 ma 9 v Q v in Q 20v, i o =40ma 1.5 vn 10hz Q f Q 100khz 4 9 v rr 10 v Q v in Q 20v, i o =40ma, f=120hz,t j =25 4 0 46 db vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 0.75 mv/ ace78l0 8 g (refer to the test circuits, t j =0~125 , i o =40ma, v in =1 4 v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank (5%) v in =1 4 v, i o =40ma, t j =25 10.5 v Q v in Q 2 3 v, 1ma Q i o Q 40ma 10.5 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 7.60 8.40 v vo (line regulation) 10.5 v Q v in Q 2 3 v, i o =40ma, t j =25 10 175 mv 11 v Q v in Q 2 3 v, i o =40ma, t j =25 8 125 vo (load regulation) v in =1 4 v, 1ma Q i o Q 100ma, t j =25 15 80 mv v in =1 4 v, 1ma Q i o Q 7 0ma, t j =25 8 40 iq v in =14v, i o =0m a,t j =25 2.0 5.5 ma iq v in =14v, 1ma Q i o Q 40ma 0.1 ma 11v Q v in Q 23v, i o =40ma 1.5 vn 10hz Q f Q 100khz 49 v rr 11v Q v in Q 21v, i o =40ma, f=120hz,t j =25 39 45 db vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 0.75 mv/
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 4 ace78l0 9 g (refer to the test circuits, t j =0~125 , i o =40ma, v in =1 5 v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank (5%) v in =1 5 v, i o =40ma, t j =25 11.5 v Q v in Q 2 4 v, 1ma Q i o Q 40ma 11.5 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 8.55 9.45 v vo (line regulation) 11.5 v Q v in Q 2 4 v, i o =40ma, t j =25 90 200 mv 13 v Q v in Q 2 4 v, i o =40ma, t j =25 100 150 vo (load regulation) v in =1 5 v, 1ma Q i o Q 100ma, t j =25 20 90 mv v in =1 5 v, 1ma Q i o Q 4 0ma, t j =25 10 45 iq v in =15v, i o =0ma,t j =25 2.0 6.0 ma iq v in =15v, 1ma Q i o Q 40ma 0.1 ma 13v Q v in Q 24v, i o =40ma 1.5 vn 10hz Q f Q 100khz 49 v rr 12v Q v in Q 23v, i o =40ma, f=120hz,t j =25 38 44 db vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 0.75 mv/ ace78l 10 g (refer to the test circuits, t j =0~ 125 , i o =40ma, v in =1 7 v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank (5%) v in =1 7 v, i o =40ma, t j =25 13 v Q v in Q 2 5 v, 1ma Q i o Q 40ma 13 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 9.50 10.5 v vo (line regulation) 13 v Q v in Q 2 5 v, i o =40ma, t j =25 51 175 mv 14 v Q v in Q 2 5 v, i o =40ma, t j =25 42 125 vo (load regulation) v in =1 7 v, 1ma Q i o Q 100ma, t j =25 20 90 mv v in =1 7 v, 1ma Q i o Q 4 0ma, t j =25 11 40 iq v in =17v, i o =0ma,t j =25 4.2 6.0 ma iq v in =17v, 1ma Q i o Q 40ma 0.1 ma 14v Q v in Q 25v, i o =40ma 1.5 vn 10hz Q f Q 100khz 62 v rr 15v Q v in Q 25v, i o =40ma, f=120hz,t j =25 37 44 db vd i o =100ma, t j =25 1.7 v
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 5 ace78l 12 g (refer to the test circuits, t j =0~125 , i o =40ma, v in =1 9 v, c in =0.33f , co=0.1 f unless otherwise specif ied) (note1) symbol test condition min typ max unit vo b - rank (5%) v in =1 9 v, i o =40ma, t j =25 14.5 v Q v in Q 2 7 v, 1ma Q i o Q 40ma 14.5 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 11.40 12.60 v vo (line regulation) 14.5 v Q v in Q 2 7 v, i o =40ma, t j =25 25 300 mv 16 v Q v in Q 2 7 v, i o =40 ma, t j =25 20 250 vo (load regulation) v in =1 9 v, 1ma Q i o Q 100ma, t j =25 25 150 mv v in =1 9 v, 1ma Q i o Q 4 0ma, t j =25 12 75 iq v in =19v, i o =0ma,t j =25 2.0 6.0 ma iq v in =19v, 1ma Q i o Q 40ma 0.1 ma 16v Q v in Q 27v, i o =40ma 1.5 vn 10hz Q f Q 100khz 80 v rr 15v Q v in Q 25v, i o =40ma, f=120hz,t j =25 37 65 db vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 - 1.0 mv/ ace78l 15 g (refer to the test circuits, t j =0~125 , i o =40ma, v in = 23 v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank (5%) v in = 23 v, i o =40ma, t j =25 17.5 v Q v in Q 30 v, 1ma Q i o Q 40ma 17.5 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 14.25 15.75 v vo (line regulation) 17.5 v Q v in Q 30 v, i o =40ma, t j =25 25 150 mv 20 v Q v in Q 30 v, i o =40ma, t j =25 15 75 vo ( load regulation) v in = 23 v, 1ma Q i o Q 100ma, t j =25 20 150 mv v in = 23 v, 1ma Q i o Q 7 0ma, t j =25 25 150 iq v in =23v, i o =0ma,t j =25 2.2 6.5 ma iq v in =23v, 1ma Q i o Q 40ma 0.1 ma 20v Q v in Q 30 v, i o =40ma 1.5 vn 10hz Q f Q 100khz 90 v rr 18.5v Q v in Q 28.5 v, i o =40ma , f=120hz,t j =25 34 63 db vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 - 1.3 mv/
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 6 ace78l 18 g (refer to the test circuits, t j =0~125 , i o =40ma, v in = 27 v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank (5%) v in = 27 v, i o =40ma, t j =25 21 v Q v in Q 33 v, 1ma Q i o Q 40ma 21 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 17.10 18.9 v vo (line regulation) 21 v Q v in Q 3 3 v, i o =40ma, t j =25 145 300 mv 2 2 v Q v in Q 3 3 v, i o =40ma, t j =25 135 250 vo (load regulation) v in = 2 7 v, 1ma Q i o Q 100ma, t j =25 30 170 mv v in = 2 7 v, 1ma Q i o Q 4 0ma, t j =25 15 85 iq v in =2 7 v, i o =0ma,t j =25 2.0 6.0 ma iq v in =2 7 v, 1ma Q i o Q 40ma 0.1 ma 2 1 v Q v in Q 3 3 v, i o =40ma 1.5 vn 10hz Q f Q 100khz 150 v rr 23 v Q v in Q 33 v, i o =40ma, f=120hz,t j =25 34 48 d b vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 - 1.8 mv/ ace78l 24 g (refer to the test circuits, t j =0~125 , i o =40ma, v in = 33 v, c in =0.33f , co=0.1 f unless otherwise specified) (note1) symbol test condition min typ max unit vo b - rank (5%) v in = 33 v, i o =40ma, t j =25 27 v Q v in Q 38 v, 1ma Q i o Q 40ma 27 v Q v in Q vmax, 1ma Q i o Q 70ma (note2) 22.80 25.20 v vo (line regulation) 27 v Q v in Q 38 v, i o =40ma, t j =25 160 300 mv 28 v Q v in Q 38 v, i o =40ma, t j =25 150 250 vo (load regulation) v in = 33 v, 1ma Q i o Q 100ma, t j =25 4 0 200 mv v in = 33 v, 1ma Q i o Q 4 0ma, t j =25 20 100 iq v in = 33 v, i o =0ma,t j =25 2.2 6.0 ma iq v in = 33 v, 1ma Q i o Q 40ma 0.1 ma 2 7 v Q v in Q 3 8 v, i o =40ma 1.5 vn 10hz Q f Q 100khz 200 v rr 2 7 v Q v in Q 3 8 v, i o =40ma, f=120hz,t j =25 34 45 db vd i o =100ma, t j =25 1.7 v v o / t j i o =5ma, 0 Q t j Q 125 - 2.0 mv/
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 7 note 1: the maximum steady state usable output current is dependent on input voltage, heat sinking, lead length of the package and copper of pcb. the data above represent pulse test conditions with junction tem peratures specified at the initiation of test. note 2: power dissipation<0.5w. characteristics curve 78l05g 78l 12 g 78l 24 g 78l 12 g 78l05g 78l05g
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 8 78l 24 g 78l 12 g 78l05g
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 9 packing information sot - 89 - 3
ace 78lxxg 1 00ma positive voltage r egulator ver 1. 5 10 notes ace does not assume any responsibility for use as critical components in life support devices or systems without the express written approval of the president and general counsel of ace electronics co., ltd. as sued herein: 1. life support devices or s ystems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and shoes failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably ex pected to result in a significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its s afety or effectiveness. ace technology co., ltd. http://www.ace - ele.com/
|
